- Transmitter with 4-20 mA 2-wire ( PASSIVE ) for thermocouples, RTD
(Pt100 – Cu50) sensors and wireless 2-3 for temperature measurement in
industrial environments, with excellent EMC characteristics and HART
communication protocol. - Allows remote transmission temperature , with safety and interference
immunity. - The output is linearized with temperature, with a high load capacity loop
that allows a wide range from 12V to 30V supply (protected
against polarity reversal). - It has an intelligent adaptive filter to stabilize the signal.
- Its small size , encapsulated and sealed with resin format provides high
electric strength, mechanical and environmental. - HIGH ACCURACY 0,1ºC 16 BIT
2 – 3 wires connection - FLOATING CLAMPS
Include spring loaded screws
It help us to made the insertion in the Din Head - FULLY ISOLATED (And linearization)
- MULTIPLES INPUTS:
Thermocouples (J -K -S -R -T -E -N- B) RTD (PT100 & Cu50)
ISOLATION (Input to Out- put): 1500 vac
- WIDE RANGE
Supply 12…30 V
Low power consumption. - PROTECTED
Fully encapsulated in epoxy resin. Harsh, hostile enviroments. Tropicalized
Temperature range: -40ºC +85ºC
Features:
Input:
| Thermocouple (J-K-S-R-T-E-N-B) | |
| Input Impedance: | > 10 MOhm |
| Cold Joint compensation | |
| Rejection: | Linearization according to EN60684 (ITS-90) |
| RTD | |
| Maximum Cable Resistance: | 20 Ohms/ per Wire |
| Connection Method: | 2 – 3 Wires Linearization: BS EN 60751 (IEC 751) |
POWER SUPPLY:
| Self powered by loop | |
| Supply voltage: | 6…32 Vdc Protected against inverse polarity |
ENVIROMENTAL DATA:
| Humidity non condensing: | 30…90% |
| Work ́s temperature: | -40ºC +80ºC |
| Storage ́s temperature: | -50ºC + 100ºC |
STANDARDS:
| EMC | 2014/30/EU |
| DBT | 2014/35/EU |
| EN | 61000-6-2 |
| EN | 61000-6-3 |
| EN | 61010-1 |
