UCES-400 Ultrasonic Cable Stripping Machine uses powerful pulses of Ultrasonic energy to strip the sheath from mineral insulated cable.
The ultrasonic energy transfers to the insulation on contact and de-compacts and liquefies the powder, which escapes from the end of the cable.
The result is that all the powder in the stripped section is cleanly removed leaving the conductors completely untouched.
The whole action is completed in seconds (in the case of small cables in a fraction of a second).
All cable sizes can be accommodated from 1.0mm (0.04”) to 6.0mm (or ¼”)
The only preparation needed prior to stripping is to ring through the sheath at the break point (up to 25mm from the cable end).
The machine is supplied with a ringing tool and a pair of electronic side cutting pliers for the smaller sizes.